Users Guide
To uncongure VAP, use the no vxlan-instance 1 command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
Defaults Disabled
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.4(0.0) Introduced on the S6000.
Usage Information You must disable vxlan-instance before unconguring VAP.
Related Commands feature vxlan — Enable VXLAN conguration globally on the platform.
vxlan-instance loopback
Provision VXLAN and non-VXLAN loopback ports that support routing in and out of VXLAN tunnels and enable MAC level loopback on all
these ports.
Syntax
vxlan-instance instance ID loopback [port-channel id]
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1.
port-channel id (Optional) Enter the keyword port-channel and the port-channel ID to provision
VXLAN and non-VXLAN loopback ports that support routing in and out of VXLAN
tunnels.
Defaults Disabled.
Command Modes PORT CHANNEL CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Updated to enable MAC level loopback.
9.13(0.0) Introduced on the S4048T-ON, S4048–ON, S6010–ON, S6000–ON, S6100–ON, S6000,
and Z9100–ON.
Usage Information You must congure VXLAN globally before using VXLAN-instance. Use the no shutdown command to enable
the VXLAN instance.
Virtual Extensible LAN (VXLAN) 1971