Users Guide

To delete vxlan-instance from the system, use no vxlan-instance instance ID command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1.
nsx Enter the keyword nsx to connect to an NSX controller.
NOTE: When no keyword is specied, the nsx option is applied.
nuage Enter the keyword nuage to connect to a Nuage controller.
static Enter the keyword static to congure static VXLANs.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced nsx and Nuage keywords on the S5048F–ON.
9.13(0.0) Introduced nsx and Nuage keywords on the S4048–ON, S4048T-ON, S6000, S6000–
ON, S6100–ON, S6010–ON, and Z9100–ON.
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Usage Information You must congure VXLAN globally before using VXLAN-instance. Use the no shutdown command to enable
the VXLAN instance.
Example
Enable VXLAN instance:
DellEMC(conf)#int 1/5/1
DellEMC(conf-if-te-1/5/1)#vxlan-instance 1
DellEMC(conf-if-te-1/5/1-vxlan-inst-1)#no shutdown
Disable VXLAN instance:
DellEMC(conf)#no vxlan-instance 1
Related Commands feature vxlan — Enable VXLAN conguration globally on the platform.
vxlan-instance (VAP)
To congure a VXLAN-Access Port (VAP) in to VXLAN-instance
Syntax
vxlan-instance instance ID
1970 Virtual Extensible LAN (VXLAN)