Users Guide

To remove the association, use the no vnid command.
Parameters
VNID-Range Enter the range of VNIDs that need to be members of the specic VNI prole. The range
is from 1 to 16777215.
Defaults None.
Command Modes VNI-PROFILE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information Use this command to associate the specied range of VNIDs to a VNI prole.
vni-prole
Create a VNI prole to associate with remote VTEP conguration.
Syntax
vni—profile profile name
To delete the VNI prole, use the no vni-profile command.
Parameters
prole name Enter a valid and unique prole name. The prole name can have a maximum of 32
characters.
Defaults None
Command Modes VXLAN-INSTANCE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information
Use this command to create a VNI prole with a unique prole name to associate with remote VTEP. You can
create a maximum of 1024 VNI proles and remote VTEP IPs.
You can use this command only when you congure static VXLAN.
vxlan-instance
Enable VXLAN Instance conguration on the platform.
Syntax
vxlan-instance instance ID [nsx | nuage | static]
Virtual Extensible LAN (VXLAN) 1969