Users Guide

To remove the conguration, use the no peer-ovsdbserver-ip
Parameters
peer-ip-address Enter the peer OVSDB server IP address. This is usually the management IP address of
the peer VLT device.
Defaults Not congured
Command Modes VXLAN-INSTANCE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S6000, S6000–ON, S6010-ON, S4048-ON, S4048T-ON, S5048F-ON,
S6100-ON, and Z9100-ON.
remote-vtep-ip
Create a remote VTEP and associate it to specied VNIDs.
Syntax
remote—vtep—ip IP Address vni-profile profile name
To delete the remote VTEP, use the no remote—vtep—ip command.
Parameters
IP Address Enter the IP Address of the remote VTEP.
vni-prole Enter the keyword vni-profile followed by the prole name to which the remote
VTEP has to be associated.
Defaults None.
Command Modes VXLAN-INSTANCE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information Use this command to associate a specic VNID to a remote VTEP. Provide a valid prole name while associating to
the remote VTEP.
NOTE: The remote VTEP IP Address cannot be any of the local IP Addresses congured in the switch.
vnid
Associate a range of VNID numbers to a specic VNI prole.
Syntax
vnid VNID-Range
1968 Virtual Extensible LAN (VXLAN)