Users Guide
Parameters
IP Address Enter the local IP Address to be used as a source for VXLAN tunnels.
Defaults None.
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information Use the local-vtep-ip IP Address command to set the local IP Address that would be used as source for
VXLAN tunnels.
max_backo
Congures time to wait between connection attempts with controller.
Syntax
max_backoff time
Parameters
time Enter the time in milliseconds. The range is from 1000-180000. The default value is 30000.
Defaults 30000
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Usage Information The retry interval value caps at the value congured on the max-backo.
Related Commands vxlan-instance — Enable VXLAN Instance conguration on the platform.
peer-ovsdbserver-ip
Specify the IP address of the peer OVSDB server in a VLT setup.
Syntax
peer-ovsdbserver-ip peer-ip-address
Virtual Extensible LAN (VXLAN) 1967