Users Guide

Parameters
interface interface-
type
Enter the keyword interface and the interface type to clear all MAC addresses learnt
on that interface. The same is also notied to the controller.
remote-vtep-ip ip-
address
Enter the keyword remote-vtep-ip and the IP address of the remote VTEP to clear
all MAC addresses learnt from that VTEP.
vnid vnid Enter the keyword vnid and the VNID of to clear all MAC addresses learnt from all
access interfaces that belong the VNID.
all Enter the keyword all to clear both MAC address of the VXLAN and legacy VLAN.
interface Enter the keyword interface to clear MAC address from a specic interface.
vlan Enter the keyword vlan to clear MAC address from a specic vlan.
vxlan Enter the keyword vxlan to clear MAC address from a specic vxlan.
Command Modes EXEC Privilege
Command History This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
clear vxlan vxlan-instance statistics
Clear the remote VTEP and access port statistics.
Syntax
clear vxlan vxlan-instance instance ID statistics
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
Command Modes EXEC Privilege
Command History This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information Use this command to clear the remote VTEP and access port statistics.
Virtual Extensible LAN (VXLAN) 1963