Users Guide

igmp-snoop Enter the keywords igmp-snoop to display the IGMP snooping VLT statistics.
mac Enter the keyword mac to display the VLT MAC addresses VLT statistics.
multicast Enter the keyword multicast to display the multicast VLT statistics.
ndp Enter the keyword ndp to display the NDP VLT statistics.
Default Not congured.
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.2(0.2) Added parameters multicast and ndp
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Added support in the output for ARP, MAC, and IGMP snooping.
8.3.8.0 Introduced on the S4810.
Related Commands
• clear vlt statistics — clears the statistics on VLT operations.
Example
NOTE: The following example shows the statistics for all the VLT parameters. If you enter a specic
keyword, such as mac, only the statistics for that VLT parameter displays.
Dell_VLTpeer1# show vlt statistics
VLT Statistics
----------------
HeartBeat Messages Sent: 930
HeartBeat Messages Received: 909
ICL Hello's Sent: 927
ICL Hello's Received: 910
Domain Mismatch Errors: 0
Version Mismatch Errors: 0
Config Mismatch Errors: 0
VLT MAC Statistics
----------------
L2 Info Pkts sent:6, L2 Mac-sync Pkts Sent:0
Virtual Link Trunking (VLT) 1955