Users Guide

Version Description
9.13(0.0) Updated to show mismatch in VXLAN instance parameters.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced support for Q-in-Q implementation over VLT on the S-Series and Z-Series. Introduced on the
S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux (PMUX) mode only.
9.0.2.0 Introduced on the S6000.
Example
DellEMC#show vlt mismatch
Domain
------
Parameters Local Peer
---------- ----- ----
Vlan-config
---------------------------------
Vlan-ID Local Mode Peer Mode
--------- ------------ ---------
20 L2 --
Vlan IPV4 Multicast Status
--------------------------
Vlan-ID Local Status Peer Status
-------- ------------ -----------
55 Inactive Active
1500 Inactive Active
VLT-VXLAN config
---------------
VLAN to VNI config mismatch
--------------------------------------
Vlan-ID Local VNID Peer VNID
--------- ------------ -----------
10 10 -
11 11 -
12 12 -
13 13
-
VXLAN enabled status on VLT Port Channels
-------------------------------------------
Local-Lag Status Peer-Lag Status
--------- -------- -------- --------
1952
Virtual Link Trunking (VLT)