Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1941

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux

(PMUX) mode only.

9.2(0.2) Introduced on the Z9000, S4810, and S4820T.

9.0.2.0 Introduced on the S6000.

peer-link port-channel

Congure the specied port channel as the chassis interconnect trunk between VLT peers in the domain.

Syntax

peer-link port-channel port-channel-number {peer-down-vlan vlan id}

Parameters

port-channel-

number

Enter the port-channel number that acts as the interconnect trunk. The range is from 1 to

128.

peer-down-vlan

vlan id

Enter the keywords peer-down-vlan then a VLAN ID to congure the VLAN that the

VLT peer link uses when the VLT peer is down.

Defaults Not congured.

Command Modes VLT DOMAIN