Users Guide

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.7(0.0) Removed the default value on the S-Series and Z-Series.

9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL Switch.

Usage Information When a VLT peer goes down, the local VLT node stops sending its peer’s MAC address. If you congure this

timeout, the local VLT node sends its peer's MAC address until the timer expires.

Use this timer when you enable vlt-peer-mac transmit. A typical use example is a square VLT topology with

a single link connecting to the remote peers.

Example

DellEMC(conf-vlt-domain-proxy-gw-lldp)# peer-timeout 5

vlt-peer-mac transmit

Enables the device to transmit the peer MAC address along with its own MAC address in LLDP TLV packets to the remote VLT domain.

S4048–ON

Syntax

[no] vlt-peer-mac transmit

Command Modes VLT DOMAIN PROXY GW LLDP