Users Guide

vlan-range
Enter the VLAN IDs that you want to exclude from the proxy gateway. The value can be a
single VLAN ID, comma-separated VLAN IDs, a range of VLAN IDs, or a combination. For
example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW LLDP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information You must congure the VLT port channel interface which is connecting to the remote VLT domain as peer-domain-
link. You can also congure the VLANs you want to exclude from the VLT proxy gateway.
Example
DellEMC(conf)#vlt-domain 1
DellEMC(conf-vlt-domain)#proxy-gateway lldp
DellEMC(conf-vlt-domain-proxy-gw-lldp)#peer-domain-link port-channel 20
exclude-vlan 3
proxy-gateway peer-timeout
Enables the VLT node to timeout the transmission of the peer MAC address when the VLT peer is down.
Syntax
[no] peer-timeout value
Parameters
value Enter the timeout value (in seconds). The range is from 1 to 65535. The default is innity.
Default Innity
Command Modes VLT DOMAIN PROXY GW LLDP
1932 VLT Proxy Gateway