Users Guide

3 The proxy-gateway LLDP conguration is applied.
Example
DellEMC(conf)# vlt-domain 1
DellEMC(conf-vlt-domain)# proxy-gateway lldp
DellEMC(conf-vlt-domain)#
proxy-gateway static
Enables the proxy-gateway feature using static congurations.
Syntax
[no] proxy-gateway static
Command Modes VLT DOMAIN
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000.
Usage Information
When you add a proxy-gateway static conguration, the setting is saved in the Layer 2 module. When you remove
the static proxy gateway conguration, each proxy-gateway static MAC congured is deleted from the Layer 2
module.
Example
DellEMC(conf)# vlt-domain 1
DellEMC(conf-vlt-domain)# proxy-gateway static
DellEMC(conf-vlt-domain)#
remote-mac-address exclude-vlan
Congure the proxy-gateway static entry and exclude a VLAN or a range of VLANs from proxy routing.
Syntax
[no] remote-mac-address mac—address [exclude-vlan vlan-range]
Parameters
remote-mac-
address
Specify the mac-addresses of the VLT peers which are in the remote VLT domain.
mac-address Enter the 48-bit hexadecimal address in nn:nn:nn:nn:nn:nn format.
1930 VLT Proxy Gateway