Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1891

Version Description

9.10.0.2 Introduced on the Z9100–ON.

9.8(2.0) Introduced on the S3100 series.

9.10(0.0) Introduced on the S3148.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux

(PMUX) mode only.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.4.2.3 Introduced on the S-Series S50.

Related Commands

• clear ufd-disable — re-enable downstream interfaces that are in a UFD-Disabled Error state.

description

Enter a text description of an uplink-state group.

Syntax

description text

Parameters

text Text description of the uplink-state group. The maximum length is 80 alphanumeric

characters.

Defaults none

Command Modes UPLINK-STATE-GROUP

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.