Users Guide

start-day Enter the number of the day. The range is from 1 to 31. You can enter the name of a
month to change the order of the display to time day month year.
start-year Enter a four-digit number as the year. The range is from 1993 to 2035.
start-time Enter the time in hours:minutes. For the hour variable, use the 24-hour format; example,
17:15 is 5:15 pm.
end-day Enter the number of the day. The range is from 1 to 31. You can enter the name of a
month to change the order of the display to time day month year.
end-month Enter the name of one of the 12 months in English. You can enter the name of a day to
change the order of the display to time day month year.
end-time Enter the time in hours:minutes. For the hour variable, use the 24-hour format; example,
17:15 is 5:15 pm.
end-year Enter a four-digit number as the year. The range is from 1993 to 2035.
oset (OPTIONAL) Enter the number of minutes to add during the summer-time period. The
range is from 1 to1440. The default is 60 minutes.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Related Commands
• clock summer-time recurring — sets a date (and time zone) on which to convert the switch to daylight saving
time each year.
1862 System Time and Date