Users Guide

Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
The write memory command saves the running-conguration to the le labeled startup-conguration. When
using a LOCAL CONFIG FILE other than the startup-cong not named “startup-conguration” (for example, you
used a specic le during the boot config command), the running-cong is not saved to that le; use the
copy command to save any running-conguration changes to that local le.
When you use the write memory command to copy the running conguration to the startup conguration le
with the startup conguration verication feature enabled, the system prompts you to update the hash for the
startup conguration using the
verified boot hash command.
176 Control and Monitoring