Users Guide

NOTE: For v1 / v2c trap conguration, if the community-string is not dened using the snmp-server
community command prior to using this command, the default form of the snmp-server community
command automatically is congured with the community-name the same as specied in the snmp-
server host command.
Conguring Informs
To send an inform, use the following steps:
1 Congure a remote engine ID.
2 Congure a remote user.
3 Congure a group for this user with access rights.
4 Enable traps.
5 Congure a host to receive informs.
Related Commands
• snmp-server enable traps — enables SNMP traps.
• snmp-server community — congures a new community SNMPv1 or SNMPv2c.
snmp-server location
Congure the location of the SNMP server.
Syntax
snmp-server location text
To delete the SNMP location, use the no snmp-server location command.
Parameters
text Enter an alpha-numeric text string, up to 55 characters long.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
1748 Simple Network Management Protocol (SNMP) and Syslog