Users Guide

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.4.1.0 Introduced

Usage Information Dell EMC Networking OS must have the default CAM prole with the default microcode before you enable L2PT.

protocol-tunnel rate-limit

Enable trac rate limiting per box.

Syntax

protocol-tunnel rate-limit rate

To reset the rate limit to the default, use the no protocol-tunnel rate-limit rate command.

Parameters

rate Enter the rate in frames per second. The range is from 75 to 3000. The default is 75.

Defaults 75 frames per second.

Command Modes CONF-IF-VLAN-STACK

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.