Users Guide

Parameters
method-list-name Enter the keywords method-list-name to specify that method list, created in the
aaa authentication login command, to be applied to the designated terminal
line.
default Enter the keyword default to specify that the default method list, created in the aaa
authentication login command, is applied to the terminal line.
Defaults No authentication is performed on the console lines. Local authentication is performed on the virtual terminal and
auxiliary lines.
Command Modes LINE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.6.0.0 Revised introductory and usage guidelines description.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.0 Introduced on the E-Series.
Usage Information
If you congure the aaa authentication login default command, the login authentication default command
automatically is applied to all terminal lines.
When conguring authentication, consider the following:
• If you congure the default authentication list using the default keyword, the list applies it to all the local and
remote connections globally, unless you have specied some another authentication list for a specic
connection.
• If you congure an authentication lists other than default, you must apply those authentication lists to each
connection.
1610 Security