Users Guide

Version Description
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Example of show
qos statistics
egress—queue
with per queue per
port tx and drop
rates
Example of show
qos statistics
wred-profile
DellEMC(conf)#do show qos statistics wred-profile
Global Wred State : Enabled
Interface Te 1/11
Drop-statistic Dropped Pkts
Green 0
Yellow 6730113
Out of Profile 0
Usage Information
In a dual homing setup, you can use this command only from the primary VLT peer.
The following list describes output of the show qos statistics command in the example:
• Queue # — Queue Number.
• Queued Bytes — Snapshot of the byte count in that queue.
• Queued Pkts — Cumulative packet count in that queue.
• Matched Pkts — The number of packets that matched the class-map criteria.
NOTE: When you congure trust , matched packet counters are not incremented in this
eld.
• Matched Bytes — The number of bytes that matched the class-map criteria.
NOTE: When you congure trust , matched byte counters are not incremented in this
eld.
• Dropped Pkts — The total of the number of packets dropped for green, yellow and out-of-prole.
show qos wred-prole
View the WRED prole details.
Syntax
show qos wred-profile wred-profile-name
Parameters
wred-prole-name Enter the WRED prole name to view the prole details.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
1506 Quality of Service (QoS)