Users Guide

Command Modes CLASS-MAP CONFIGURATION (cong-class-map)
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Introduced the seq option for the class-map on all the Dell EMC Networking OS
platforms.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added the DSCP Marking option support on the S-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series; added support for the DSCP Marking option.
6.1.1.1 Introduced on the E-Series.
Usage Information To access this command, enter the class-map command. After the class map is identied, you can congure the
match criteria. For class-map match-any, a maximum of ve ACL match criteria are allowed. For class-map
match-all
, only one ACL match criteria is allowed.
Related Commands
• class-map — identies the class map.
match ip dscp
Use a dierentiated services code point (DSCP) value as a match criteria.
Syntax
[seq sequence number] match {ip | ipv6 | ip-any} dscp dscp-list [set-ip-dscp
value]
To remove a DSCP value as a match criteria, use the no [seq sequence number] match {ip | ipv6 |
ip-any} dscp dscp-list [[multicast] set-ip-dscp value] command.
1474 Quality of Service (QoS)