Users Guide

TOS 0 Metric: 1
Link connected to: a Transit Network
(Link ID) Designated Router address: 192.68.142.2
(Link Data) Router Interface address: 192.68.142.2
Number of TOS metric: 0
TOS 0 Metric: 1
Link connected to: a Transit Network
(Link ID) Designated Router address: 192.68.141.2
(Link Data) Router Interface address: 192.68.141.2
Number of TOS metric: 0
TOS 0 Metric: 1
Link connected to: a Transit Network
(Link ID) Designated Router address: 192.68.140.2
(Link Data) Router Interface address: 192.68.140.2
Number of TOS metric: 0
TOS 0 Metric: 1
Link connected to: a Stub Network
(Link ID) Network/subnet number: 11.1.5.0
--More--
Related Commands
• show ip ospf database — display OSPF database information.
show ip ospf database summary
Display the network summary (type 3) LSA routing information.
Syntax
show ip ospf [process-id | vrf vrf-name ] database summary [link-state-id]
[adv-router ip-address]
Parameters
process-id Enter the OSPF Process ID to show a specic process. If no Process ID is entered,
command applies only to the rst OSPF process.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to view LSA routing information
corresponding to the OSPF process that is tied to a specic VRF.
link-state-id (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the
LSA type, and it can be one of the following:
• the network’s IP address for Type 3 LSAs or Type 5 LSAs
• the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
adv-router ip-
address
(OPTIONAL) Enter the keywords adv-router then the IP address of an Advertising
Router to display only the LSA information about that router.
Command Modes
• EXEC
• EXEC Privilege
Open Shortest Path First (OSPFv2 and OSPFv3) 1321