Users Guide

track resolution ipv6 route
Congure the protocol-specic resolution value used to scale an IPv6 route metric.
Syntax
track resolution ipv6 route {isis resolution-value | ospf resolution-value}
To return to the default setting, use the no track object-id command.
Parameters
object-id Enter the ID number of the tracked object. Use the range to 1 to 500.
isis resolution-value Enter the resolution used to convert the metric in the routing table for ISIS routes to a
scaled metric.
ospf resolution-
value
Enter the resolution used to convert the metric in the routing table for OSPF routes to a
scaled metric.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage Information
Use this command to congure the protocol-specic resolution value that converts the actual metric of an IPv6
route in the routing table to a scaled metric in the range 0 to 255.
The UP/DOWN state of a tracked IPv6 route is determined by the user-congurable threshold (the threshold
metric command) for a route’s metric in the routing table. To provide a common tracking interface for dierent
clients, route metrics are scaled in the range 0 to 255, where 0 is connected and 255 is inaccessible.
The protocol-specic resolution value calculates the scaled metric by dividing a route's cost by the resolution value
set for the route protocol:
• For ISIS, you can set the resolution in the range 1 to 1000, where the default is 10.
• For OSPF, you can set the resolution in the range 1 to 1592, where the default is 1.
• The resolution value used to map static routes is not congurable. By default, Dell EMC Networking OS assigns
a metric of 0 to static routes.
Object Tracking 1253