Users Guide

Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Related Commands
• track interface ip routing – congure object tracking on the routing status of an IPv4 Layer 3 interface.
• track interface line-protocol – congure object tracking on the line-protocol state of a Layer 2 interface.
• track ip route metric threshold – congure object tracking on the threshold of an IPv4 route metric.
• track ip route reachability – congure object tracking on the reachability of a specic IP address. Policy-based
Routing uses the track command to track the next-hop ip address.
show running-cong track
Display the current conguration of tracked objects.
Syntax
show running-config track [object-id]
Parameters
object-id (OPTIONAL) Display information on the specied tracked object. The range is 1 to 500.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Example
DellEMC# show running-config track
track 1 ip route 23.0.0.0/8 reachability
track 2 ipv6 route 2040::/64 metric threshold
1236 Object Tracking