Users Guide

• mtu — set the maximum transmission unit (MTU) value.
• other-cong-ag — enable the verication of the advertised other conguration parameter.
• reachable-time — set the advertised reachability time.
• retrans-timer — set the advertised retransmission time.
• router-preference maximum — enable the verication of the advertised default router preference (DRP) value.
• trusted-port — apply the policy to trusted ports.
• ipv6 nd raguard attach-policy — apply the IPv6 RA guard to a specic interface.
trusted–port
Allow bypassing the congured RA guard validation and forwards the RA packets received on the interface, which has the trusted port
policy attached.
Syntax
trusted-port
To reset the policy applied to the trusted port, use the no trusted-port command.
Defaults None
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the C9010.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.9(0.0) Introduced on the Z9500.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000 switches.
Usage Information Use this command to disable all the RA guard policies.
Related Commands
• ipv6 nd ra-guard enable — congure the RA guard related commands.
• ipv6 nd raguard policy policy-name — dene the router advertisement (RA) guard policy name and enter the
RA guard policy conguration mode.
1232 Neighbor Discovery Protocol (NDP)