Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1221

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.11(0.0) Introduced on the C9010.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.

Related Commands

• ipv6 nd ra-guard enable — congure the RA guard related commands.

• ipv6 nd raguard policy policy-name — dene the router advertisement (RA) guard policy name and enter the

RA guard policy conguration mode.

match ra

Enable verifying either of the congured source IPv6 address or prex address or the source MAC address in the inspected messages. If

this command is not congured, the verication process is bypassed.

Syntax

match ra {ipv6-access-list name | ipv6-prefix-list name | mac-access-list name}

To reset the access list, use the no match ra{ipv6-access-list | ipv6-prefix-list | mac-

access-list}command.

Parameters

ipv6–access-list

name

Enter the keywords ipv6–access-list then the access-list name. The access-list

name allows a maximum of 140 characters.

ipv6–prex-list

name

Enter the keywords ipv6–prefix-list then the prex-list name. The prex-list name

allows a maximum of 140 characters.

ipv6–mac-access-

list name

Enter the keywords ipv6–mac-access-list then the mac-access-list name. The

mac-access-list name allows a maximum of 140 characters.

Defaults None

Command Modes POLICY LIST CONFIGURATION