Users Guide
debug lldp interface
To display timer events, neighbor additions or deletions, and other information about incoming and outgoing packets, enable LLDP
debugging.
Syntax
debug lldp interface {interface | all}{events | packet {brief | detail} {tx |
rx | both}}
To disable debugging, use the no debug lldp [interface {interface | all}{events} {packet
{brief | detail} {tx | rx | both}}] command.
Parameters
interface interface Enter the following keywords and slot/port[/subport] or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port[/subport] information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
all Enter the keyword all to display information on all interfaces.
events Enter the keyword events to display major events such as timer events.
packet Enter the keyword packet to display information regarding packets coming in or going
out.
brief Enter the keyword brief to display brief packet information.
detail Enter the keyword detail to display detailed packet information.
tx Enter the keyword tx to display transmit-only packet information.
rx Enter the keyword rx to display receive-only packet information.
both Enter the keyword both to display both receive and transmit packet information.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.13.0.0 Enhanced to display organizational specic unrecognized LLDP TLVs.
9.11.2.5 Enhanced to display unrecognized TLVs.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
1126 Link Layer Discovery Protocol (LLDP)