Users Guide

Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Added the vlan option on the E-Series.
7.7.1.0 Introduced on the C-Series and S-Series.
pre-6.2.1.1 Introduced on the E-Series.
Example
DellEMC# show mac-address-table aging-time
Mac-address-table aging time : 1800
DellEMC#
Related Commands
• show mac-address-table — display the current MAC address conguration.
show mac accounting destination
Display destination counters for Layer 2 trac (available on physical interfaces only).
Syntax
show mac accounting destination [mac-address vlan vlan-id] [interface interface
[mac-address vlan vlan-id] [vlan vlan-id]] [vlan vlan-id]
Parameters
mac-address (OPTIONAL) Enter the MAC address in the nn:nn:nn:nn:nn:nn format to display
information on that MAC address.
interface interface (OPTIONAL) Enter the keyword interface then the interface type, slot and port
information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port
[/subport] information.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to display the MAC address
assigned to the VLAN. The range is from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Layer 2 1095