Users Guide
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port[/subport] information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to display the MAC address
assigned to the VLAN. The range is from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.3.7.0 Introduced on the S4810.
pre-6.2.1.1 Introduced on the E-Series.
show cam mac linecard (dynamic or static)
Display the CAM size and the portions allocated for MAC addresses and for MAC ACLs.
Syntax
show cam mac linecard slot port-set port-pipe [address mac_addr | dynamic |
interface interface | static | vlan vlan-id]
Parameters
linecard slot (REQUIRED) Enter the keyword linecard then a slot number to select the linecard for
which to gather information.
port-set port-pipe (REQUIRED) Enter the keywords port-set then a Port-Pipe number to select the Port-
Pipe for which to gather information. The range is from 0 or 1.
address mac-addr (OPTIONAL) Enter the keyword address then a MAC address in the nn:nn:nn:nn:nn:nn
format to display information on that MAC address.
dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC addresses the
switch dynamically learns.
interface interface (OPTIONAL) Enter the keyword interface then the interface type, slot and port
information:
• For a port channel interface, enter the keywords port-channel then a number.
1090 Layer 2