Users Guide

Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
Usage Information If you congure mac-learn-limit and the sticky MAC feature is enabled, dynamically learned MAC addresses
are converted to sticky for that port. Any new MAC address that is learned also becomes sticky for that port.
Related Commands
• show mac learning-limit — display the details of the mac learning-limit.
mac learning-limit station-move-violation
Specify the actions for a station move violation.
Syntax
mac learning-limit station-move-violation {log | shutdown-both | shutdown-
offending | shutdown-original}
To disable a conguration, use the no mac learning-limit station-move-violation command, then
the congured keyword.
Parameters
log Enter the keyword log to generate a syslog message on a station move violation.
shutdown-both Enter the keyword shutdown to shut down both the original and oending interface and
generate a syslog message.
shutdown-oending Enter the keywords shutdown-offending to shut down the oending interface and
generate a syslog message.
Layer 2 1087