Users Guide

Hello Interval: 10, Hello Multiplier: 3, CSNP Interval: 10
--More--
show isis neighbors
Display information about neighboring (adjacent) routers.
Syntax
show isis [vrf vrf-name] neighbors [level-1 | level-2] [detail] [interface]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to display adjacent
router information corresponding to that VRF.
level-1 (OPTIONAL) Displays information about Level 1 IS-IS neighbors.
level-2 (OPTIONAL) Displays information about Level 2 IS-IS neighbors.
detail (OPTIONAL) Displays detailed information about neighbors.
interface (OPTIONAL) Enter the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port[/subport] information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
•
For a port channel interface, enter the keywords port-channel then a number.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
1062 Intermediate System to Intermediate System (IS-IS)