Service Manual

ip vlan-flooding
Enable unicast data traffic flooding on VLAN member ports.
Syntax
ip vlan-flooding
To disable, use the no ip vlan-flooding command.
Command Modes CONFIGURATION
Command
History
Version 9.3(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL platforms
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL platforms.
Default Disabled
Usage
Information
By default this command is disabled. There might be some ARP table entries which are resolved through
ARP packets which had Ethernet MAC SA different from MAC information inside the ARP packet. This
unicast data traffic flooding occurs only for those packets which use these ARP entries.
Microsoft Network Load Balancing 923