Service Manual

00:44:00:00:00:02 Te 11/1 1000 10000 5120000
00:44:00:00:00:01 Te 11/1 1000 10000 5120000
00:22:00:00:00:00 Te 11/1 1000 10000 5120000
00:44:00:00:00:02 Te 11/1 2000 10000 5120000
00:44:00:00:00:01 Te 11/1 2000 10000 5120000
Dell-1#
Related
Commands
show mac accounting access-list — displays the MAC access list configurations and counters (if
configured).
show mac learning-limit
Display MAC address learning limits set for various interfaces.
Syntax
show mac learning-limit [violate-action] [detail] [interface interface]
Parameters
violate-action (OPTIONAL) Enter the keywords violate-action to display the MAC learning
limit violation status.
detail (OPTIONAL) Enter the keyword detail to display the MAC learning limit in detail.
interface
interface
(OPTIONAL) Enter the keyword interface with the following keywords and
slot/port[/subport] or number information:
● For a port channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport] information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Added the vlan option on the E-Series.
7.7.1.0 Introduced on the C-Series.
7.5.1.0 Added support for the violate-action and detail options.
6.5.1.0 Added support for Port Channel.
Layer 2 881