Service Manual

Example (S6000)
Dell#S6000#show version
Dell Real Time Operating System Software
Dell Operating System Version: 2.0
Dell Application Software Version: 9-4(0-119)
Copyright (c) 1999-2014 by Dell Inc. All Rights Reserved.
Build Time: Tue Mar 18 10:32:02 PDT 2014
Build Path: /work.local/build/buildSpaces/build01/E9-4-0/SW/SRCC
Dell Networking OS uptime is 1 day(s), 0 hour(s), 19 minute(s)
System image file is "DT-MAA-S6000-16-PI"
System Type: S6000
Control Processor: Intel Centerton with 3203911680 bytes of memory,
core(s) 2.
16G bytes of boot flash memory.
1 32-port TE/FG (SI)
32 Forty GigabitEthernet/IEEE 802.3 interface(s)
upgrade
Upgrade the bootflash image or system image of the management unit.
Syntax
upgrade boot {all | bootflash—image | bootselector-image} stack-unit
{stack-unit-number | all} {booted | flash: | ftp: | nfsmount | scp: | tftp:
| usbflash:} file-url
Parameters
boot Enter the keyword boot to change the boot image.
system Enter the keyword system to change the system image.
ftp: After entering the keyword ftp:, you can either follow it with the location of the
source file in this form: //userid:password@hostip/filepath or press
Enter to launch a prompt sequence.
scp: After entering the keyword scp:, you can either follow it with the location of the
source file in this form: //userid:password@hostip/filepath or press
Enter to launch a prompt sequence.
slot0: After entering the keyword slot0:, you can either follow it with the location of
the source file in this form: //hostlocation/filepath or press Enter to
launch a prompt sequence.
tftp: After entering the keyword tftp:, you can either follow it with the location of the
source file in this form: //hostlocation/filepath or press Enter to launch a
prompt sequence.
flash: After entering the keyword flash:, you can either follow it with the location of
the source file in this form: flash//filepath or press Enter to launch a prompt
sequence.
A: | B: Enter the partition to upgrade from the flash.
stack-unit: Enter the keywords stack-unit: to synch the image to the stack-unit.
file-url Enter the following location keywords and information to upgrade using an Dell
Networking OS image other than the one currently running:
● To specify an Dell Networking OS image on the internal flash, enter flash://
file-path/filename.
● To specify an Dell Networking OS image on an FTP server, enter ftp://
user:password@hostip/filepath.
● To specify an Dell Networking OS image on the external flash, enter slot0://
file-path/filename.
● To copy a file on a TFTP server, enter tftp://hostip/filepath/
filename.
File Management 77