Service Manual

redundancy
for the current RPM redundancy configuration
resolve
for the current DNS configuration
rip
for the current RIP configuration
rmon
for the current RMON configuration
route-map
for the current route map configuration
sflow
for the current sFlow configuration
snmp
for the current SNMP configuration
spanning-tree
for the current spanning tree configuration
static
for the current static route configuration
status
for the file status information
support-
assist
for the current SupportAssist configuration
tacacs+
for the current TACACS+ configuration
tftp
for the current TFTP configuration
trace-group
for the current trace-group configuration
trace-list
for the current trace-list configuration
uplink-state-
group
for the uplink state group configuration
users
for the current users configuration
vlt
for the current VLT configuration
wred-profile
for the current wred-profile configuration
configured (OPTIONAL) Enter the keyword configuration to display line card interfaces
with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the checksum for the running
configuration and the start-up configuration.
compressed (Optional) Enter the keyword compressed to display the compressed group
configuration. Displays the compressed configuration by grouping all similar
configurations. The compression is done only for interface related configurations.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.2.(0.0) Added support for the tunnel and EIS interface types.
9.0.0.0 Added support for the VLT option.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
File Management 73