Service Manual

show boot system

Displays information about boot images currently configured on the system.

Syntax

show boot system {stack-unit | all}

Parameters

all Enter the keyword all to display the boot image information for all stack units.

stack-unit Enter the keyword stack-unit followed by a number to display boot image

information for a stack-unit.

The range is from 1 to 6.

Defaults none

Command Modes

● EXEC

● EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the C-Series and E-Series.

Example

Dell#show boot system stack-unit 1

Current system image information in the system:

=============================================

Type Boot Type A B

----------------------------------------------------------------

Stack-unit 1 FLASH BOOT 9-0(2-1) 9-0(2-0)[boot]

Dell#

show bootvar

Display the variable settings for the boot parameters.