Service Manual

rmdir
Removes a directory from the NFS mounted file system.
Syntax
rmdir nfsmount://mount-point/usrname
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S-Series.
Example
Dell#rmdir nfsmount:/nfs-mountpoint/guest
Proceed to remove the directory [confirm yes/no]: yes
Dell#
Related
Commands
mkdir – creates a directory.
HTTP Copy via CLI
Copy one file to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the hostip
field).
Syntax
copy http://10.16.206.77/sample_file flash://sample_filecopy flash://
sample_file http://10.16.206.77/sample_file
You can copy from the server to the switch and vice-versa.
Parameters
copy http:
flash:
Address or name of remote host []: 10.16.206.77
Port number of the server [80]:
Source file name []: sample_file
User name to login remote host: x
Password to login remote host:
Destination file name [sample_file]:
Defaults None.
Command Modes EXEC Privilege
Command
History
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3(0.1) Introduced on the S6000, Z9000, S4810, and S4820T.
Example
copy http://admin:admin123@10.16.206.77/sample_file flash://sample_file
64 File Management