Service Manual

ip igmp immediate-leave
Enable IGMP immediate leave.
Syntax
ip igmp immediate-leave [group-list prefix-list-name]
To disable ip igmp immediate leave, use the no ip igmp immediate-leave command.
Parameters
group-list prefix-
list-name
Enter the keywords group-list then a string up to 16 characters long of the
prefix-list-name.
Defaults Not configured.
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
Querier normally sends some group-specific queries when a leave message is received for a group prior
to deleting a group from the membership database. There may be situations when you require immediate
deletion of a group from the membership database. This command provides a way to achieve the
immediate deletion. In addition, this command provides a way to enable immediate-leave
processing for specified groups.
ip igmp last-member-query-interval
Change the last member query interval, which is the Max Response Time inserted into Group-Specific Queries sent in response
to Leave Group messages. This interval is also the interval between Group-Specific Query messages.
Syntax
ip igmp last-member-query-interval milliseconds
To return to the default value, use the no ip igmp last-member-query-interval command.
Parameters
milliseconds Enter the number of milliseconds as the interval. For IGMP version 2, the range is
from 100 to 25599. For IGMP version 3, the range is from 100 to 65535. The
default value is 1000 milliseconds.
604 Internet Group Management Protocol (IGMP)