Service Manual

information for the named destination — remote destination, destination filename, user ID, password, and
so forth.
When you use the copy running-config startup-config command to copy the running
configuration (the startup configuration file amended by any configuration changes made since the
system was started) to the startup configuration file, Dell Networking OS creates a backup file on the
internal flash of the startup configuration.
Dell Networking OS supports copying the running-configuration to a TFTP server, an FTP server, or a
remote NFS file system. For example:
● copy running-config tftp:
● copy running-config ftp:
● copy running-config nfsmount://<mount-point>/filepath
You can compress the running configuration by grouping all the VLANs and the physical interfaces with
the same property. You can store the operating configuration to the startup config in Compressed mode
and perform an image downgrade without any configuration loss.
Example
Dell#copy running-config scp:/
Address or name of remote host []: 10.10.10.1
Destination file name [startup-config]? old_running
User name to login remote host? sburgess
Password to login remote host? dilling
In this copy scp: flash: example, specifying SCP in the first position indicates that you need to
specify the target in the ensuing prompts. Entering flash: in the second position indicates that the
target is the internal flash. The source is on a secure server running secure shell (SSH), so you are
prompted for the user datagram protocol (UDP) port of the SSH server on the remote host.
Example
Dell#copy running-config nfsmount://<mount-point>/filepath
Destination file name [test.txt]:
User name to login remote host: usrname
Password to login remote host:
Example
Dell#copy scp: flash:
Address or name of remote host []: 10.11.199.134
Port number of the server [22]: 99
Source file name []: test.cfg
User name to login remote host: admin
Password to login remote host:
Destination file name [test.cfg]: test1.cfg
Example
Dell#copy compressed-config compressed-cfg
!
6655 bytes successfully copied
Dell#
Dell#copy compressed-config ftp:
Address or name of remote host []: 10.11.8.12
Destination file name [startup-config]:
User name to login remote host: spbalaji
Password to login remote host:
!
6655 bytes successfully copied
Example
Dell#copy http://admin:admin123@10.16.206.77/sample_file flash://
sample_file
Related
Commands
cd – changes the working directory.
File Management 59