Service Manual

show gvrp
Display the GVRP configuration.
Syntax
show gvrp [brief | interface]
Parameters
brief (OPTIONAL) Enter the keyword brief to display a brief summary of the GVRP
configuration.
interface (OPTIONAL) Enter the following keywords and slot/port[/subport] or number
information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport] information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
● For a port channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Usage
Information
If no ports are GVRP participants, the message output changes from GVRP Participants running
on <port_list> to GVRP Participants running on no ports.
Example
R3#show gvrp brief
GVRP Feature is currently enabled.
Port GVRP Status Edge-Port
----------------------------------------------
Te 3/1 Disabled No
Te 3/2 Enabled No
Te 3/3 Disabled No
Te 3/4 Disabled No
Te 3/5 Disabled No
Te 3/6 Disabled No
Te 3/7 Disabled No
Te 3/8 Disabled No
R3#show gvrp brief
GARP VLAN Registration (GVRP) 585