Service Manual

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
lease
Specify a lease time for the addresses in a pool.
Syntax
lease {days [hours] [minutes] | infinite}
Parameters
days Enter the number of days of the lease. The range is from 0 to 31.
hours Enter the number of hours of the lease. The range is from 0 to 23.
minutes Enter the number of minutes of the lease. The range is from 0 to 59.
infinite Specify that the lease never expires.
Defaults 24 hours
Command Modes DHCP <POOL>
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
netbios-name-server
Specify the NetBIOS Windows Internet Naming Service (WINS) name servers, in order of preference, that are available to
Microsoft Dynamic Host Configuration Protocol (DHCP) clients.
Syntax
netbios-name-server address [address2...address8]
Dynamic Host Configuration Protocol (DHCP) 515