Service Manual

● Interface all prio-group {id | all} - ingress priority-group level snapshot

Command Modes

EXEC

EXEC Privilege

Command

History

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.8(0.0) Added the keyword interface all.

9.7(0.0) Introduced on the S6000-ON.

9.6(0.0) Introduced on the S5000.

9.3(0.0) Introduced on the S6000, S4810, and S4820T.

Usage

Information

The following information is displayed based on the buffer-info type, such as device-level details, queue-

based snapshots, or priority group-level snapshot in the egress and ingress direction of traffic:

● Device-ingress – Displays total buffer accounting usage for the unit.

● Device-egress –Display total buffer usage for the unit, total multicast buffer usage for the unit and

also on per-service-pool basis. Counters will be displayed for the 2 service-pools – one for normal

traffic and other for DCB traffic.

When the buffer-stats-snapshot is disabled, the following informational message is displayed when you

run the show command: %Info: Buffer-stats-snapshot feature is disabled.

Example

Dell#show hardware stack-unit 1 buffer-stats-snapshot unit 3 resource

interface all queue mcast 3

Unit 1 unit: 3 port: 1 (interface Fo 1/144)

---------------------------------------