Service Manual

Parameters
stack-unit id Enter the keywords stack-unit then a number to select a particular stack
member and then enter one of the following command options to clear a specific
collection of data. The range is from 1 to 6.
counters Enter the keyword counters to clear the counters on the selected stack member.
unit number
counters
Enter the keyword unit along with a port-pipe number, then the keyword
counters to clear the counters on the selected port-pipe. The range is from 0 to 0.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to clear the data plane
statistics.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics to clear the management
statistics.
stack-port Enter the keywords stack-port then the port number of the stacking port to
clear the statistics of the particular stacking port. The range is from 1 to 72.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Related
Commands
show hardware stack-unit — displays the data plane or management plane input and output statistics of
the designated component of the designated stack member.
clear hardware system-flow
Clear system-flow statistics from selected hardware components.
Syntax
clear hardware system-flow layer2 stack-unit number port-set 0–0 counters
Parameters
stack-unit
number
Enter the keywords stack-unit then a number to select a particular stack
member and then enter one of the following command options to clear a specific
collection of data. The range is from 1 to 6.
port-set 0–0
counters
Enter the keywords port-set along with a port-pipe number, then the keyword
counters to clear the system-flow counters on the selected port-pipe. The range is
from 0 to 0.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Debugging and Diagnostics 487