Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

331

332

333

334

335

336

337

338

339

340

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

7.7.1.0 Introduced on the C-Series.

7.2.1.0 Introduced.

Usage

Information

This command is a knob to disable BGP next-hop resolution using BGP learned routes. During the next-

hop resolution, only the first route that the next-hop resolves through is verified for the route’s protocol

source and is checked if the route is learned from BGP or not.

The clear ip bgp command is required for this command to take effect and to keep the BGP

database consistent. Execute the clear ip bgp command right after executing this command.

Commands

clear ip bgp — clears the ip bgp.

bgp regex-eval-optz-disable

Disables the Regex Performance engine that optimizes complex regular expression with BGP.

Syntax