Service Manual

NOTE: Some group names and some access list names are truncated.
Dell#show running-config acl-vlan-group
!
acl-vlan-group Test
member vlan 1-100
ip access-group test in
Dell#show acl-vlan-group
Group Name Egress IP Acl Ingress IP Acl Ingress V6 Acl
Vlan Members
Test - test -
1-100
The following sample output is displayed when using the show acl-vlan-group group-name
option.
NOTE: The access list name is truncated.
Dell#show acl-vlan-group TestGroupSeventeenTwenty
Group Name Egress IP Acl Ingress IP Acl Ingress IPV6
Acl Vlan Members Test -
test - 1-100
The following sample output shows the line-by-line style display when using the show acl-vlan-
group detail option.
NOTE: No group or access list names are truncated
Dell#show acl-vlan-group detail
Group Name :
Test
Egress IP Acl :
-
Ingress IP Acl :
test
Ingress IPV6 Acl :
-
Vlan Members :
1-100
show cam-acl-vlan
Display the number of flow processor (FP) blocks that is allocated for the different VLAN services.
Syntax
show cam-acl-vlan
Command Modes EXEC Privilege
Command
History
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL platforms
Usage
Information
After CAM configuration for ACL VLAN groups is performed, you must reboot the system to enable the
settings to be stored in nonvolatile storage. During the initialization of CAM, the chassis manager reads
the NVRAM and allocates the dynamic VCAP regions.
The following table describes the output fields of this show command:
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM) 301