Service Manual

Access Control Lists (ACL)
Access control lists (ACLs) are supported by the Dell Networking OS.
Dell Networking OS supports the following types of ACL, IP prefix list, and route maps:
● Commands Common to all ACL Types
● Common IP ACL Commands
● Standard IP ACL Commands
● Extended IP ACL Commands
● Common MAC Access List Commands
● Standard MAC ACL Commands
● Extended MAC ACL Commands
● IP Prefix List Commands
● Route Map Commands
● AS-Path Commands
● IP Community List Commands
NOTE: For ACL commands that use the Trace function, refer to the Trace List Commands section in the Security chapter.
NOTE: For IPv6 ACL commands, refer to IPv6 Access Control Lists (IPv6 ACLs).
Topics:
• Commands Common to all ACL Types
• Common IP ACL Commands
• Standard IP ACL Commands
• Extended IP ACL Commands
• Common MAC Access List Commands
• Standard MAC ACL Commands
• Extended MAC ACL Commands
• IP Prefix List Commands
• Route Map Commands
• AS-Path Commands
• IP Community List Commands
• UDF ACL Commands
• deny (for Standard IP ACLs)
• deny (for Extended IP ACLs)
• seq (for Standard IPv4 ACLs)
• deny tcp (for Extended IP ACLs)
• deny udp (for Extended IP ACLs)
• deny arp (for Extended MAC ACLs)
• deny icmp (for Extended IP ACLs)
• deny ether-type (for Extended MAC ACLs)
• deny (for Standard MAC ACLs)
• deny (for Extended MAC ACLs)
• permit (for Standard IP ACLs)
• permit arp (for Extended MAC ACLs)
• permit ether-type (for Extended MAC ACLs)
• permit icmp (for Extended IP ACLs)
• permit udp (for Extended IP ACLs)
• permit (for Extended IP ACLs)
• permit (for Standard MAC ACLs)
• seq (for Standard MAC ACLs)
7
184 Access Control Lists (ACL)