Service Manual

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the S-Series.
traceroute ethernet
Send a linktrace message to an MEP.
Syntax
traceroute ethernet domain [name | level] ma-name remote {mep-id mep-id |
mac-addr mac-address}
Parameters
domain name |
level
Enter the keyword domain then the domain name or level.
ma-name ma-
name
Enter the keyword ma-name then the maintenance association name.
mepid mep-id Enter the MEP ID that is the trace target.
mac-addr mac-
address
Enter the MAC address of the trace target.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the S-Series.
802.1ag 165