Service Manual

Example
Dell#show ethernet cfm maintenance-points remote detail
MAC Address: 00:01:e8:58:68:78
Domain Name: cfm0
MA Name: test0
Level: 7
VLAN: 10
MP ID: 900
Sender Chassis ID: Force10
MEP Interface status: Up
MEP Port status: Forwarding
Receive RDI: FALSE
MP Status: Active
show ethernet cfm mipbd
Display the MIP database.
Syntax
show ethernet cfm mipdb
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the S-Series.
show ethernet cfm statistics
Display MEP statistics.
Syntax
show ethernet cfm statistics [domain {name | level} vlan-id vlan-id mpid
mpid]
Parameters
domain Enter the keyword domain to display statistics for a particular domain.
name | level Enter the domain name or level.
vlan-id vlan-id Enter the keyword vlan-id then a VLAN ID.
mpid mpid Enter the keyword mpid then a maintenance point ID.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
802.1ag 161