Service Manual

show running-config vxlan
Displays the VXLAN configuration information from running configuration.
Syntax
show running-config vxlan
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S6000.
Example
Dell#show running-config vxlan
!
feature vxlan
!
vxlan-instance 1
gateway-ip 3.3.3.3
fail-mode secure
controller 1 192.168.122.6 port 6632 ssl
no shutdown
Related
Commands
vxlan-instance- Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance unicast-mac-remote
Displays the information of the remote unicast MACs associated with the logical network related to Network Virtualization
Overlay (NVO) Gateway.
Syntax
show vxlan vxlan-instance instance ID unicast-mac-remote [logical-network
name | vnid VNID]
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
name (Optional) Enter the name of VXLAN logical network with a maximum length of 30
characters.
vnid VNID (Optional) Enter the keyword vnid and then enter the ID of the VXLAN. The range
is from 1 to 16777215.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
1520 Virtual Extensible LAN (VXLAN)