Service Manual

802.1ag
802.1ag is available on the Dell Networking OS.
Topics:
• ccm disable
• ccm transmit-interval
• clear ethernet cfm traceroute-cache
• database hold-time
• disable
• domain
• ethernet cfm
• ethernet cfm mep
• ethernet cfm mip
• mep cross-check
• mep cross-check enable
• mep cross-check start-delay
• ping ethernet
• show ethernet cfm domain
• show ethernet cfm maintenance-points local
• show ethernet cfm maintenance-points remote
• show ethernet cfm mipbd
• show ethernet cfm statistics
• show ethernet cfm port-statistics
• show ethernet cfm traceroute-cache
• service
• traceroute cache hold-time
• traceroute cache size
• traceroute ethernet
ccm disable
Disable continuity check message (CCM).
Syntax
ccm disable
Enter no ccm disable to enable CCM.
Defaults Disabled
Command Modes ECFM DOMAIN
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
5
152 802.1ag