Service Manual

ssl (OPTIONAL) Enter the keyword ssl to configure ssl connection to controller
(Default).
Defaults Disabled
Command Modes VXLAN INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Related
Commands
vxlan-instance — Enable VXLAN instance configuration on the platform.
show vxlan vxlan-instance
Displays information related to Network Virtualization Overlay (NVO) Gateway.
Syntax
show vxlan vxlan-instance instance ID
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S6000.
Example
Dell#show vxlan vxlan-instance 1
Instance : 1
Admin State : enabled
Management IP : 192.168.200.200
Gateway IP : 3.3.3.3
MAX Backoff : 30000
Controller 1 : 192.168.122.6:6632 ssl (connected)
Fail Mode : secure
Port List :
Fo 1/49 Te 1/16 Te 1/20 Po 2
Related
Commands
vxlan-instance- Enable VXLAN Instance configuration on the platform.
Virtual Extensible LAN (VXLAN) 1519